Allied Bolt - PART# 7350

• Used for attaching heavy loads to concrete, brick, and hollow block.
• Can be removed for adjustment, then re-driven into same hole.
• The Concrete Bolt is designed to match standard fixture clearance holes that are 1/16" over anchor diameter to provide a secure fit.
• Hex size is 15/16".
• The washer diameter is 1-3/16".
• Thread length is 3-3/4".
• Minimum Embedment is 2-1/2".
• Can be installed at shallower embedment depths than wedge or sleeve anchors reducing the chance of striking reinforcing bars or embedded cables.
• Utilizes a specially designed relief thread formed in the body of the anchor which allows easy tightening at a reduced torque level and provides dust relief to prevent anchor from jamming.
• A chamfered end easily centers anchor, and a 30° helix angle allows anchor to be tightened quickly. The controlled “screw-in” method is safer than using a hammer.
• Diameter and length appear on the head of each anchor.
• Mechanically galvanized to meet ASTM Specification B695
• Manufactured from AISI 1038 heat-treated steel.

Standard Packaging Information